f

Mixlr Support

Broadcast using Traktor S4 (Windows)

This article explains how to broadcast on Mixlr using DJ software - 'Traktor' and an external controller - 'Traktor S4'. You'll be using Traktor to mix tracks from your computer, and the S4 to control your levels, crossfader etc. Your entire set will be broadcast live and direct on Mixlr. Sweet! (Tip - These instructions can be translated to almost any external controller or audio interface.)

Step 1 - Open Traktor Preferences

You will find the audio preferences in Traktor's settings:

Step 2 -Traktor Audio Setup

Ensure the Audio Setup settings in Traktor are as follows:

Step 3: TraktorOutput Routing

In the Output Routing settings in Traktor, ensure the 'Output Monitor' and 'Output Master' areas follows:

Step 4: Connect output to inputon the S4

Traktor is sending audio to Output, whilst Mixlr is trying to receive audio from the Input. Simply physically route 'Main Out 1 and 2' to 'Input Channel C 1 and 2' on the S4 using a phono to phono cable:

Step 5: Connect the S4 to your speakers

Use the remaining outputs in 'Main Out' to connect your speakers:

Step 6: Open Mixlr

Open the Mixlr app. If you haven't downloaded it yet, you can do so here.

Step 7:Select the S4 as your audio source:

(Tip - If you're having problems with the Mixlr app receiving audio signal,check that you have the latest Traktor drivers installed. You can download the latest drivers here.)

Step 8: Go live and enjoy!

support@mixlr.com
http://assets0.desk.com/
Mixlr
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
Invalid characters found
/customer/en/portal/articles/autocomplete